Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.     

Readily Accessible and Predictable Naphthalene‐Based Two‐Photon Fluorophore with Full Visible‐Color Coverage

Herein we report 22 acedan‐derived, two‐photon fluorophores with synthetic feasibility and full coverage of visible wavelength emission. The emission wavelengths were predicted by computational analysis, which enabled us to visualize multicolor images by two‐photon excitation with single wavelength, and to design a turn‐on, two‐photon fluorescence sensor for endogenous H₂O₂ in Raw 264.7 macrophage and rat brain hippocampus ex vivo.     

Polymerizations of methyl methacrylate and rac-lactide by zinc(II) precatalyst containing N-substituted 2-iminomethylpyridine and 2-iminomethylquinoline

The reaction of [ZnCl₂] with N-cyclopentyl-1-(quinolin-2-yl)methanimine (L_A), N-cyclohexyl-1-(quinolin-2-yl)methanimine (L_B), N-cyclohexyl-1-(pyridin-2-yl)methanimine (L_C), 2,6-diethyl-N-(pyridin-2-ylmethylene)aniline (L_D), N-cyclopentyl-1-(pyridin-2-yl)methanimine (L_E), and N-phenyl-(pyridin-2-yl)methanimine (L_F) in ethanol produced the bidentate [(NN′)ZnCl₂] complexes, [L_AZnCl₂], [L_BZnCl₂], [L_CZnCl₂], [L_DZnCl₂], [L_EZnCl₂] and [L_FZnCl₂], respectively. The molecular structures revealed that the zinc in [L_nZnCl₂] (L_n = L_A ? L_D) showed a distorted tetrahedral geometry involving two nitrogens of N,N’-bidentate ligands and two chloride ligands. Most of these initiators were effective for polymerization of methyl methacrylate (MMA) and polymerization of rac-lactide (rac-LA). [L_CZnCl₂] (with N-cyclohexyl substituted at imine-pyridine moiety) exhibited the highest catalytic activity for MMA polymerization in the presence of modified methylaluminoxane (MMAO) with an activity of 3.33 × 10⁴ g PMMA/mol·Zn·h at 60 °C, giving moderate syndiotactic poly methyl methacrylate (PMMA) with high molecular weight (9.62 × 10⁵ g/mol). The dimethyl derivatives [L_nZnMe₂] (L_n = L_A ? L_F), generated in situ, polymerized rac-LA with moderate activity and yielded a polylactide (PLA) with good number-average molecular weights and narrower polydispersity indices (PDIs). [L_AZnMe₂] effectively initiates the ring-opening polymerization (ROP) of rac-LA to attain heterotactic PLA (P_r = 0.91).     

Development of optical fiber-based respiration sensor for noninvasive respiratory monitoring

In this study, two types of nasal-cavity-attached fiber-optic respiration sensors have been fabricated for noninvasive respiratory monitoring. One is a silver halide optical-fiber-based respiration sensor that can measure the variations of infrared radiation generated by the respiratory airflow from a nasal cavity. The other is a thermochromic-pigment-based fiber-optic respiration sensor that can measure the intensity of reflected light which changes owing to color variations of the temperature-sensing film according to the temperature difference between inspiratory and expiratory air. We have demonstrated the similarities of the respiratory signals using the fiber-optic respiration sensors and the temperature transducer of the BIOPAC? system. In addition, we verified that respiratory signals without the deterioration of the MR image can be obtained using the fiber-optic respiration sensors. It is anticipated that the proposed noninvasive fiberoptic respiration sensors will be highly effective for respiratory monitoring of a patient during MRI procedures.     

Synthesis of 2-amino-3-cyano-4H-chromen-4-ylphosphonates and 2-amino-4H-chromenes catalyzed by tetramethylguanidine

Synthesis of 2-amino-4H-chromen-4-ylphosphonates and 2-amino-4H-chromenes has been accomplished by the reaction of salicylaldehyde, malononitrile, dialkyl/diphenylphosphites catalyzed by 1,1,3,3-tetramethylguanidine (TMG) under neat conditions at room temperature. The applicability of catalytic TMG for the synthesis of 2-amino-4H-chromenes also has been described. The mild reaction conditions, simple work-up procedure, and use of TMG as an inexpensive catalyst provides an economical protocol for the preparation of important phosphorus-containing compounds.     

Assessing the role of chemical components in cellular responses to atmospheric particle matter (PM) through chemical fractionation of PM extracts

In order to further our understanding of the influence of chemical components and ultimately specific sources of atmospheric particulate matter (PM) on pro-inflammatory and other adverse cellular responses, we promulgate and apply a suite of chemical fractionation tools to aqueous aerosol extracts of PM samples for analysis in toxicity assays. We illustrate the approach with a study that used water extracts of quasi-ultrafine PM (PM_0.25) collected in the Los Angeles Basin. Filtered PM extracts were fractionated using Chelex, a weak anion exchanger diethylaminoethyl (DEAE), a strong anion exchanger (SAX), and a hydrophobic C18 resin, as well as by desferrioxamine (DFO) complexation that binds iron. The fractionated extracts were then analyzed using high-resolution sector field inductively coupled plasma mass spectrometry (SF-ICPMS) to determine elemental composition. Cellular responses to the fractionated extracts were probed in an in vitro rat alveolar macrophages model with measurement of reactive oxygen species (ROS) production and the cytokine tumor necrosis factor-α (TNF-α). The DFO treatment that chelates iron was very effective at reducing the cellular ROS activity but had only a small impact on the TNF-α production. In contrast, the hydrophobic C18 resin treatment had a small impact on the cellular ROS activity but significantly reduced the TNF-α production. The use of statistical methods to integrate the results across all treatments led to the conclusion that sufficient iron must be present to participate in the chemistry needed for ROS activity, but the amount of ROS activity is not proportional to the iron solution concentration. ROS activity was found to be most related to cationic mono- and divalent metals (i.e., Mn and Ni) and oxyanions (i.e., Mo and V). Although the TNF-α production was not significantly affected by the chelexation of iron, it was greatly impacted by the removal of organics with the C18 resin and all other metal removal methods, suggesting that iron is not a critical pathway leading to TNF-α production, but a wide range of soluble metals and organic compounds in particulate matter play a role. Although the results are specific to the Los Angeles Basin, where the samples used in the study were collected, the method employed in the study can be widely employed to study the role of components of particulate matter in in vitro or in vivo assays.     

Investigation of the redox property of a metalloprotein layer self-assembled on various chemical linkers

Myogloblin, a well-known metalloprotein, was immobilized on a gold surface using various chemical linkers to investigate the length effect of chemical linker on the electron transfer in protein layers, because chemical linkers play roles in the pathway that transfers the electron from the protein to the gold substrate and act as protein immobilization reagents. Chemical linkers with 2, 6, 11, and 16 carbons were utilized to confirm length-effects. The immobilization of protein and chemical linker was validated with surface plasmon resonance (SPR) and atomic force microscopy (AFM). The electrochemical property was evaluated by cyclic voltammetry (CV) and chronocoulometry (CC). In those results, redox peaks of immobilized protein were controlled via the length of chemical linkers, and it could be directly applied to the realization of bioelectronic device.